NewAge Products 66992 Guide D'installation Et D'utilisation page 33

Propane Gas Installation
Propane gas Cylinder Requirements
The Propane gas cylinder must be constructed and marked in accordance with the specifications for
Propane gascylinders of the U.S. Department of Transportation (DOT) and designed for use with a
Type 1 system only.
Cylinders of free standing grills must be secured using the provided cylinder retention system to
avoid accidental movement.
When exchanging your cylinder for a refill, exchange only for a Type 1 -20lb cylinder with an over-fill
protection device.
Never use a cylinder with a damaged valve.
A dented or rusty Propane gas cylinder may be hazardous and should be avoided. If in doubt, have
it checked by your Propane gas supplier.
Always check for leaks after every Propane gas cylinder change. (See Leak Testing instructions on
Page #.)
Always shut off the Propane gas supply at the cylinder when the grill is not in use.
Cylinders must be stored outdoors in a well-ventilated area out of the reach of children. If your grill
is stored indoors, the Propane gas cylinder must be detached from grill and stored outside.
Grills set up for Propane gas come equipped with an Propane gas hose/ regulator assembly for
connection to a standard 20 lb. Propane gas cylinder. (Type 1). All fittings necessary to attach the
assembly to the grill are included.
Never connect an unregulated gas line to the grill.
33