NewAge Products 66992 Guide D'installation Et D'utilisation page 31

Propane Gas Installation
Ventilation
Propane gas Cylinder Connections
Make sure the Propane gas cylinder valve is fully closed. It is possible for the valve to be open
without releasing gas but, as soon as you start connecting the regulator, gas will leak from the
connection.
Insert the regulator inlet into the cylinder valve and turn the black coupler nut clockwise until the
coupler nut is hand tight. Do not over-tighten this connection. See Figure 1 & 2.
To disconnect the coupler nut, first make sure the main cylinder valve is turned off. Grasp the
coupler nut and turn counter clockwise. The inlet will then disengage.
Always leak-test the connection after refilling or exchanging Propane gas cylinders. (See Leak
Testing Instructions.)
Non - combustible
Construction
Propane Hose and
Regulator (Supplied)
Propane Tank
(Not Supplied)
31