R&G PKS0020 Instructions

FITTING INSTRUCTIONS FOR PKS0020 KICKSTAND SHOE
Please note that the way the kit is packed does not necessarily represent the way of
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
Please note that in cases where kits are packed with rubber washers holding the components onto the
BASE PLATE
FITTING INSTRUCTIONS

Take the aluminium base plate and fit to the base of the side stand from underneath.

Offer the clamp plate around the side stand leg and position above the aluminium base plate,
with the countersinks facing upwards.

Fit the three M5 bolts clamping the two plates together and securely mounting onto the side
stand foot.
BMW R1200GS 2013
mounting to the bike.
bolt – the rubber washers should be thrown away!
CLAMP PLATE AND BOLTS
TOOLS REQUIRED

3mm A/F Allen key.
(
FOR CLARITY OF INSTRUCTIONS ONLY
)