Turbo Function - Atlantic Muraux DOJO AS 007 DBB.UI Notice D'installation Et D'utilisation

4.4.2. Health Airflow function
This function allow to a wide angle of airflow. The position of the louvers is fixed.
In HEAT mode, prefer the upward position of the airflow
In COOL mode, prefer the downward position of the airflow
Avoid manually moving the louvers.
If the louvers not operating normally, stop the unit for 1 minute, restart the unit
and adjust the position of the louvers with the remote controller.
When operating the unit in COOL or DRY mode in an environment with a high
humidity level during a long period of time, condensation can occur at the outlet
grill.
1. Press the EXTRA FUNCTION BUTTON
Press and hold the button
2. Press the CONFIRM/CANCEL button
To cancel the Health Airflow function : press EXTRA FUNCTION BUTTON
continuously, the louvers location will cycle between in the following three locations again, and then
press CONFIRM/CANCEL button

4.4.3. Turbo function

Turbo function is compatible with HEAT and COOL modes.
Use the Turbo function to heat or cool quickly. Fan speed is on High.
1.
Press repetitively the EXTRA FUNCTION button
2. Press the CONFIRM/CANCEL button
4.4.4. Fan mode (ventilation)
Please see 4, page 35.
1. Press repetitively the EXTRA FUNCTION button
2. Press the CONFIRM/CANCEL button
38
and select the Airflow desired.
and select an airflow orientation.
Health Airflow
upward
to validate the setting.
to cancel.
to activate the function.
to activate the function.
Health Airflow
upward
Health Airflow Current
position
downward
until the icon flashes.
until the icon flashes.
Health Airflow Current
.
downward position
Health Airflow
.
upward
. Press this button
Health A
downw