Basic Functions - Atlantic Muraux DOJO AS 007 DBB.UI Notice D'installation Et D'utilisation

4. BASIC FUNCTIONS

Operation mode
AUTO
COOL
DRY
HEAT
FAN
▪ 4.1. Airflow orientation adjustment
COOL/DRY/AUTO modes:
Swing up-down
•
Press the SWING button
COOL/DRY/AUTO modes:
HEAT mode:
HEAT mode:
Initial setting
• Press the SWING button again to select the swing position displayed on the remote controller.
4.2. Quiet function
Initial setting
Quiet function is compatible with HEAT and COOL modes.
Use Quiet function to reduce the noise of the unit. Fan speed is on Low.
Operating the unit with Quiet function during a long period of time can prevent
reaching set temperature.
To activate QUIET function, press the QUIET button
controller.
To deactivate the function, press the QUIET button
Remote
controller
In AUTO mode, the unit automatically selects the operation mode
and fan speed according to room temperature.
-
Use DRY mode to gradually cool your room while dehumidifying it.
In DRY mode, when the room temperature is 2°C below set
temperature, the unit operates at Low fan speed intermittently
despite the current fan speed setting.
-
In FAN mode, HEAT and COOL modes are inactive.
AUTO is unavailable in FAN mode. Temperature cannot be set.
Fan mode and Sleep function are incompatible.
Access to this function by Extra function button.
. The cycle sequence is as follows:
Remark
COOL/DRY/AUTO modes:
COOL/DRY/AUTO modes:
HEAT mode:
HEAT mode:
Initial setting
Initial setting
. The icon is displayed on the remote
again.
35