3. LOADING OF THE BATTERIES
1.
Remove the battery cover.
2.
Load the batteries as illustrated.
3.
Load the batteries, then put on the cover again.
4. BASIC OPERATION
Remote controller
1.
Press ON/OFF
2.
Press TEMP+ or TEMP- button to select a temperature setting
Every
time
increases 1°C, if kept pressed, the temperature setting increases rapidly.
Every time the button TEMP- is pressed, temperature setting decreases 1°C, if kept pressed, the
temperature setting decreases rapidly.
3.
Fan function
For each press of FAN button
Air conditioner operates under the displayed fan speed. When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room temperature.
38
2
3
on the remote controller to start the unit.
the
button
TEMP+
, fan speed changes as follows:
LOW
MED
2 AAA batteries (included).
Make sure the loading is in line
with the "+" / "-"
1
1
BOOST/SILENCE
AUTO
2
AIR
AIR
4
2
3
FONCTION +
is
pressed,
Display
circulated
HIGH
temperature
setting