Health Operation; Boost Function - Atlantic Muraux DOJO Notice D'installation Et D'utilisation

• When the unit operates in COOL and DRY modes for a long time in a very humid environment
(hair salon, etc.), condensation can occur at the grille.
4.4. Timer On/Off : On-ff operation
1. Start the unit and select an operation mode.
2. Press the TIMER ON
• Press TIMER ON IMER ON
display is blank. display is blank.
• • Press TIM Press TIMER OFF
display is blank.
3. Select the desired TIMER mode (TIMER ON or TIMER OFF ). "ON"or "OFF" flashes.
4. Press the TIMER ON
Each time the button is pressed, setting time in the first 12 hours increases by 0.5 hour, and after 12
hours, setting time increases by 1 hour.
5. Press CONFIRM/CANCEL
After adjusting the time, the time ON or OFF button stops flashing.
Cancel timer setting.
Press CONFIRM/CANCEL
• After replacing batteries or a power failure happens, time setting should be reset.
• According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-
Stop or Stop-Start can be achieved.

4.5. Health operation

(This function is unavailable on some models).
Press HEALTH button
controller.
Press again the HEALTH button

4.6. BOOST Function

(This function is unavailable on some models).
42
/ TIMER OFF buttons to change TIMER mode.
button «ON 0.5» appears on the screen, after 10 seconds the time button «ON 0.5» appears on the screen, after 10 seconds the time
button «OFF 0.5» appears on the screen, after 10 seconds the time
/ TIMER OFF buttons to set time.
to confirm timer setting.
button to cancel the timer setting.
to start the health function. The
to cancel the health function.
icon is displayed on the remote