Extra Function; Sleep Function - Atlantic Muraux DOJO AS 007 DBB.UI Notice D'installation Et D'utilisation

4.3. Timer function (Automatic power on or power off)
After replacing the batteries or a power failure, set time settings again.
TIMER ON / TIMER OFF and Start-Stop / Stop-Start are compatible.
▪
Set a Timer
1. When the unit is operating, select an operation mode.
2. Press the TIMER button
Remote controller
display
3. Select a type of timer (TIMER ON, TIMER OFF or TIMER ON-OFF). "ON" or "OFF" flashes.
4. Use the time setting buttons
or decreases by 0,5h, and 1h after 12h. The timer can be adjusted within 24h.
5.
Press the CONFIRM/CANCEL button
To cancel a TIMER press and hold the TIMER button
remote controller.

4.4. Extra function

Each press time EXTRA FUNCTION button
Sleep > Health Airflow upward > Health Airflow downward > initial airflow > Turbo > Fan mode > A-B
code > Left & right Airflow (function not available).

4.4.1. Sleep function

When a TIMER is set, Sleep function cannot be set.
After Sleep function is set, if the user resets the TIMER, Sleep function is canceled.
The indoor unit operates on TIMER ON.
1. Press the EXTRA FUNCTION button
2. Press the CONFIRM/CANCEL button
• To deactivate the function press the EXTRA FUNCTION button
button .
36
to enter Timer setting mode. The cycle sequence is as follows:
ON OFF
0,5h 0,5h
TIMER ON TIMER OFF TIMER ON-OFF
to adjust time value. With each press, time value increases
to validate the setting. "ON" or "OFF" stops flashing.
the cycle sequence is as follows :
. The
to activate the function.
ON OFF ON
0,5h 0,5h
TIMER OFF-ON
until the timer display disappears from the
icon flashes.
OFF BLANK
again and Confirm/Cancel