General Safety And Usage Instructions; General; Electrical Safety Instructions - VITO PRO-POWER VIML150HQA Mode D'emploi

GENERAL SAFETY AND USAGE INSTRUCTIONS

WARNING! When using a power tool, you should
take into account basic safety precautions to
avoid the risk of fire, electric shock and personal injury.
Always read
maintenance instructions before you start using
your power tool. Keep the instruction manual for future
reference.

General

It is your responsibility to follow these preventive
measures in order to ensure your own safety. Always
use the high-pressure washer carefully and responsibly.
In using the high-pressure washer, you accept full
responsibility for any accidents caused to third parties
or their property during its use.
Individuals who have not read the instruction manual
must not use the device. Before using the high-pressure
washer for the first time, users should be instructed by
the seller or any other qualified person on how to use
the equipment.
The instruction manual is considered an integral part of
the high-pressure washer and must always be made
available alongside the product.
Familiarize yourself with the control devices and usage
of the appliance. In particular, the user must know how
to quickly stop the equipment.
Do not use the washer if you are not both physically and
mentally well. Do not use it while you are tired or under
the influence of medication, drugs or alcohol.
have a health problem, ask your doctor if it is safe for
you to use the high-pressure washer before doing so.
Never allow the washer to be used by children, persons
with limited physical, sensory or mental capabilities,
persons with lack of experience and knowledge or other
individuals who are not familiar with the usage
instructions.
This high-pressure washer may only be used as
stated in this instruction manual. Any other use,
which may be dangerous and may cause injury to the
user or damage to the equipment, is not permitted.
the safety, operating
Do not overload the power tool and use proper tools for
each type of work. The use of the power tool for
purposes other than those intended and improper use
of accessories may result in hazardous situations.
For safety reasons, any alteration to the washer other
and
than installing accessories specifically authorized by the
manufacturer, is prohibited.
voided if you alter it in any way.
You may get information on authorized accessories
from your official VITO dealer.

Electrical safety instructions

Do not use power tools in explosive environments, such
as in the presence of flammable liquids, gases or dust.
Power tools create sparks that can ignite liquids, gases,
or dust.
The device's power cord must be plugged into a
230V 50Hz socket with differential protection.
The differential switch connected to the power supply
circuit must be set to trip when there is a maximum fault
current of 30 mA.
Sockets must be protected from moisture. If there is a
risk of flooding or presence of water, install the sockets
in a location that cannot be reached by flooding or
install waterproof sockets.
The power cord, plug and socket must be protected
from heat sources, oil and sharp objects. If the power
cord is damaged, it must be replaced by a qualified
technician.
If you
Never modify the plug of the power cord and always use
one compatible with the plug. Do not use any type of
adapter.
The use of extension cords to connect the power cord is
not recommended. However, if you use an extension
cord, you should take some precautions, such as:
▪ If using the high-pressure washer outdoors, use only
extension cords suitable for outdoor use. The use of
a suitable extension cord reduces the risk of electric
shock;
▪ Use only extension cords, plugs and sockets with
earth connection;
The warranty will be
29