Hydrosonic Function - Teuco HYDROSONIC - Hydrosilence 543 Manuel De L'utilisateur

EN
HYDROSONIC FUNCTION
When using the Hydrosonic function, nothing must be added to the water in the tub.
STARTING THE HYDROSONIC
Pressing the "O/I" button to switch on,
the display goes into READY mode.
Press the "HYDROSONIC" button
the display will show the Hydrosonic menu.
Use the
"▼"
to select the desired massage.
Start the massage by pressing "ENTER".
The massage starts and the display shows:
The exact time.
•
• The temperature of the water in the tub.
• The duration of the massage, which is 15
minutes (TIMER) and cannot be altered.
• Hydrosonic massage in progress.
AUTOCONFIRM:
if no selection is made within 5 seconds of accessing the Hydrosonic menu, the system will proceed
to activate the massage displayed.
12
36 C 20:30
o
rEADY
Display indicating READY status
and buttons
"▲"
hYDroSoNiC
ToNiC
hYDroSoNiC
AFTEr SporT
hYDroSoNiC
ANTiSTrESS
hYDroSoNiC
BEAUTY
15 36 C 20:30
o
ToNiNG
Display indicating
Hydrosonic in progress
HYDROSONIC - Hydrosilence