Honeywell MILLER H500 Mode D'emploi page 22

product will be considered not to have been maintained and no warranty will be
granted by the manufacturer. A qualified person must examine this equipment at
least once each year, in strict compliance with the instructions of the manufactur-
er and the examination must be recorded on the attached sheet and on the label
provided on the harness for this purpose.
The frequency of the examination must be increased in accordance with regula-
tions in case of heavy usage or in difficult environmental conditions. The legibility
of the product markings must be checked.
4-3 LIFESPAN
The maximal life of PPE that is predominantly textile is evaluated as being 10
years after the date of manufacture. However, the following factors may reduce
the performance of the product and its lifespan: intensive use, incorrect storage,
improper use, fall arrest, deformation, contact with chemical products (alkali and
acid), exposure to sources of heat > 50°C, exposure to high sources of cold <-30 °
C, high exposure to ultraviolet rays, dirty environment, or very wet environment. (
cf. 9 ).
5 - MISCELLANEOUS
5-1 IDENTIFICATION (CF. APPENDIX 1)
5-2 APPLICABLE REGULATIONS (1-6)
5-3 NOTIFIED BODY (CF. APPENDIX 4)
22