Operation; Setting The Volume; Starting/Pausing Playback; Track Selection - Medion LIFE P61200 Notice D'utilisation

When the two devices have been paired successfully, the sound system will emit an
acoustic signal and the PAIR LED continuously lights up blue.
 Now start audio playback on your external device or press the
the sound system to start playback.
Playback can be controlled using the corresponding buttons on the
sound system or via the audio output device. Please note that not all
operating functions may be available via the sound system due to the
different firmware and software versions.
We also recommend setting the volume on your audio output device to
maximum, and fine-tuning the volume on the sound system.
The sound system attempts to automatically connect itself to the last audio output
device connected via Bluetooth.
 To disconnect an existing Bluetooth connection, press and hold the
in Bluetooth mode.
The sound system is now back in search mode and the PAIR LED flashes blue. You
can now pair a new device.

8. Operation

8.1. Setting the volume

 Turn the
VOLUME
towards , to decrease the volume.

8.2. Starting/pausing playback

 Press the
 During playback, press the
The current playback time flashes on the display.
 Press the
button again to resume playback.

8.3. Track selection

 Press the
button to skip to the previous track.
 Press the
button to skip to the next track.

8.4. Track fast forward/rewind

 Press and hold the
 Press and hold the
 Release the respective button at the desired point in the track to resume
playback from that point.
50
controller towards
button to start playing tracks.
button to pause playback.
button to fast forward within the current track.
button to rewind within the current track.
to increase the volume or
button on
button