Getting Started; Setting Up The Device; Trolley Function; Mains Operation - Connecting The Mains Cable - Medion LIFE P61200 Notice D'utilisation

6. Getting started

6.1. Setting up the device

 Place the sound system on a sturdy, level surface. Some aggressive varnishes
can corrode the rubber feet on the device. If necessary, place the device on a
suitable underlay.

6.2. Trolley function

The integrated trolley function makes it easier to transport the sound system.
 Press and hold the locking button on the telescopic handle and extend the
telescopic handle fully until you hear it engage in the uppermost position.
Using the telescopic handle, you can now pull the sound system behind you on the
integrated transport rollers.
6.3. Mains operation – connecting the mains cable
 Connect the supplied mains cable to the AC socket (100–240 V~50/60 Hz) on
the back of the device.
 Plug the mains cable into an easily accessible power socket (see "3.2. Power
supply" on page 40).

6.4. Internal rechargeable battery

The rechargeable battery is an integral component of the device and
must only be repaired or replaced by qualified personnel.
As soon as the sound system is connected to a power socket, the built-in
rechargeable battery begins charging automatically and the CHARGE LED lights
up red.
When the battery is fully charged, the CHARGE LED lights up green.
When the battery charge level is low, the CHARGE LED flashes red.
 To continue using the device and to charge the battery, connect the sound sys-
tem to a power socket using the supplied mains cable.
6.5. Switching the device on/off
 Press and hold the
HI is shown on the display. The sound system starts in the most recently selected
operating mode.
Regardless of the previously set volume, the device always starts at the
default volume setting.
button to switch on the sound system.
DE
EN
FR
ES
IT
NL
47