Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The supplied mortar beater is suited for following materi-
als:
larger amounts of tenacious and glutinous com-
-
pounds to be mixed such as paints, varnish, translu-
cent inks, adhesives, paste, glue, knifing filler, plas-
ter, flooring plaster etc.
Always use this device with the extra handles fitted.
Increase the speed during the mixing process. Immerse
the beater through the material to be mixed until it is thor-
oughly mixed. Follow the processing instructions from the
suppliers.
Do not work with low speed in continuous mode. This
may result in overloading/overheating the motor as no suf-
ficient cooling can be generated.
Hold the device with both hands during mixing.
Do not reach in the running beater (rotating beater).
Avoid splashing. Work with low speed when immers-
ing the beater in the material to be mixed or pulling it out.
M
a
i
n
t
e
n
M
a
i
n
t
e
n
Before each maintenance and cleaning
work:
- switch off device
- wait for standstill of the beater
- pull out power plug
Use only original parts. Other parts can result in unexpected
damages and injuries.
Maintenance and repair work beyond this is only allowed to
be carried out by the manufacturer or authorized service staff.
Store unused equipment in a dry, locked place out of the
reach of children.
Observe the following to maintain the operability of the
machine:
Keep vent slits clean and free from obstructions.
Remove dust and dirt using a cloth or a soft brush.
Do not clean the machine with running water or high-
pressure cleaners.
Do not use solvents for the synthetic parts (petrol, alcohol,
etc.) as these can damage the synthetic parts.
Check that the handles are properly secured.
Clean the beater.
The agitator is equipped with carbon brushes. Have the
carbon brushes be replaced by the customer service if
they are worn
Regularly check the beater for damages for your own
safety. Immediately replace any damaged beater.
Check the shaft on a regular basis. An agitator with
defective shaft must no longer be used. Have the device be
repaired by the customer service.
a
n
c
e
a
n
d
C
a
r
e
a
n
c
e
a
n
d
C
a
r
e
S
S
Pull out power plug
Store unused equipment in a dry, locked place out of the
reach of children.
Before a longer period of storage carry out the following to
extend the machine's service life and ensure an easy op-
erating:
− thoroughly clean the device
G
u
G
u
Please observe the enclosed terms of guarantee.
t
o
r
a
g
e
t
o
r
a
g
e
a
r
a
n
t
e
e
a
r
a
n
t
e
e
12
Publicité
Chapitres
Table des Matières
