Baxtran ABD Mode D'emploi page 39

CONFIGURATION
LF 2
DISPLAY
FIRST STEP
262144
•DISPLAY OF THE INTERNAL COUNTING
•POSSIBLE VALUES OF THE PARAMETERS
SECOND STEP
A: Metric system
B: American system
1 0 0 0 0 1 C: other unities
D: PCS
A B C D E F
E: double range
F: units of calibration
lb oz cannot be selected as unities of calibration.
THIRD STEP
•Use
000000kg
FOURTH STEP
•Use the Keys
dP 0.0
FIFTH STEP •Use
diV 01, diV 02, diV 05, diV10, diV 20, diV 50
diV 01
the steps to follow must be completed, if they are not done the indicator will continue with the
previous configuration.
LF 2
•Press the key
scale will automatically restart.
•Press the key
262144
guration and go back to the menu LF2).
Use the keys
100001
WEIGHT . (press the key
•Use the keys
000000kg
MUM WEIGHT. press the key
•Use the keys
d 0.0kg
from the configuration and go back to the menu LF2).
DESCRIPTION AND SEQUENCE OF USE
0:NO
0:NO
0:NO
0:OFF
0:OFF
The scale won't let us continue up to the next step if there is a mistake during the programming.
0 ~ 9
, and ,
, to change the position of the DECIMAL POINT.
d 0.00 d 0.000
to select the DIVISION:
After introducing the parameters LF2, the indicator will show the last configuration saved. All
Proceed with the calibration of weight after LF2.
to start and display the internal value. Press
To continue with the configuration. (press the key
, and
to exit from the configuration and go back to the menu LF2).
, and
, and then
1: kg 2:T
1: lb 2:lb oz
1: TW kg 2:HK kg
1: ON
1: multi interval 2:multi range
1:use metric
2:use american unities
unities
and then press to introduce THE MAXIMUM CAPACITY.
d 0.0000
0 ~ 9
, and then press the key
0 ~ 9
, and then press the key
to exit from the configuration and go back to the menu LF2).
To move the decimal point ( press the key
USER'S MANUAL ABD
3:g
3:VISS
0.00000
to exit the menu and the
to exit from the confi-
to choose the UNITS OF
to choose the MAXI-
To exit
EN EN
39