Adding Items During A Cycle; Option Selections - GE GLD8000 Série Manuel Du Propriétaire

English

ADDING ITEMS DURING A CYCLE

You can add an item anytime before the main wash starts. Open the door and check the
detergent dispenser. If cover is still closed, you can add items.
To Add Items
1. Lift up the door latch to stop the cycle. Wait for the spraying action to stop before
opening the door.
2. Open the door. If the detergent dispenser is still closed, add the item.
3. Close the door firmly until it latches. The dishwasher resumes the cycle after about a
10-second pause.

OPTION SELECTIONS

You can customize your cycles by pressing an option. If you change your mind, press the
option again to turn the option off. Select a different option if desired. You can change an
option anytime before the selected option begins.
19
Hi-Temp Wash
Select this option to heat the water during parts of the cycle. Higher
water temperatures help clean tough soils. HI-TEMP WASH combined
with the POTS & PANS or NORMAL cycles raises the temperature in
the main wash.
This option adds heat, water and wash time to a cycle.
NOTE: HI-TEMP WASH is an option with the POTS & PANS and NORMAL
cycles. Always use HI-TEMP WASH if you have hard water.
Sanitize Rinse Option (on some models)
Select this option to raise the water temperature in the final rinse to
approximately 160°F (71°C). The SANITIZE RINSE option adds heat
and time to the cycle. This high temperature rinse sanitizes your
dishes and glassware in accordance with NSF/ANSI standard 184 for
residential dishwasher. Certified residential dishwashers are not
intended for licensed food establishements.
NOTE: ANTI-BACTERIAL WASH automatically uses this option.
SANITIZE RINSE is an option with the POTS & PANS and
NORMAL cycles. Only these sanitization cycles have been
designed to meet the NSF/ANSI requirements.