Cancelling A Cycle; Changing A Cycle Or Setting - GE GLD8000 Série Manuel Du Propriétaire

CANCELLING A CYCLE

CANCELLING A CYCLE
To Stop The Drain
You can press CANCEL/DRAIN or START/RESET again to stop the drain. Remember to
drain the dishwasher before starting a new cycle.

CHANGING A CYCLE OR SETTING

During The First Fill Of A Cycle
1. Press a new cycle and/or options.
2. Ensure detergent dispensers are full.
After The First Fill Of The Cycle
CHANGING A CYCLE OR SETTING
While A Cycle Is Running
(on some models)
Anytime during a cycle, press CANCEL/DRAIN . The dishwasher starts
a 2-minute drain (if needed). Let the dishwasher drain completely.
(on models with integrated controls)
1. Carefully open the door slightly to stop the cycle. Wait for the
spraying action to stop before opening the door to access the
control panel.
2. Press START/RESET for 1 second.
3. Close the door. The dishwasher starts a 2-minute drain (if needed).
Let the dishwasher drain completely.
1. Press CANCEL/DRAIN . The dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely.
2. Ensure detergent dispensers are full.
3. Press a new cycle and/or options.
1. Open the door.
2. Press START/RESET for 1 second. START/RESET light goes off.
3. Select a new cycle and/or option.
4. Press START/RESET .
5. START/RESET glows.
6. Check the detergent dispensers. They must be filled properly for
the new cycle.
7. Close the door.
(on some models)
(on models with integrated controls)
English
18