Panasonic PT-L735NTU Mode D'emploi page 25

Press the input select button to select the
&
input signal.
Input select
buttons
Changing
signals
BA picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
Adjusting the angle
'
BWhile pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
Press the AUTO SETUP button to initiate
(
automatic positioning.
BThe tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the
image will be corrected.
(Refer to page 27 for details.)
Adjusting the size
)
BTurn the zoom ring to adjust the size of the projected image.
Adjusting the focus
*
BTurn the focus ring to adjust the focus of the projected image.
24-E
NGLISH
VIDEO
VIDEO RGB1
S-VIDEO RGB2
RGB PT-L735NTU
only
RGB1
SDCARD
AUTO SETUP
RGB
RGB2
NETWORK