Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
the signal being input. In addition,
the angle of tilt of the projector will
be automatically detected and
adjusted in order to correct any
keystone distortion.
* SHUTTER button
(page 28)
This button is used to
momentarily turn off the picture
and sound.
+ MENU button
(pages 32 and 35)
This button is used to display the
menu screens. When a menu
screen is being displayed, this
button can be used to return to a
previous screen or to clear the
screen.
, Arrow (F F G G I I and H H ) buttons
(page 35)
These buttons are used to select and
adjust items in the menu screens.
*When in computer operating
mode, these buttons on the
remote control unit function
differently. (page 31)
- ENTER button
(page 35)
This button is used to accept and
to activate items selected in the
on-screen menus.
*When in computer operating
mode, this button on the remote
control unit functions differently.
(page 31)
. Laser emitter
(page 30)
/ Infrared emitter
(page 22)
0 Click button
(page 31)
This button can be used when the
operating mode select switch is
moved to the left (Computer).
1 PAGE button
(page 31)
This button can be used when the
operating mode select switch is
moved to the left (Computer).
2 Operation indicator
(page 30)
This indicator illuminates while a
laser beam is being emitted
(while the LASER button is being
pressed). It flashes when any
other buttons are being pressed.
3 LASER button
(page 30)
A beam of laser light is emitted while
this button is being pressed. This
laser beam can be used as a pointer
to point to something on the screen.
4 FREEZE button
(page 28)
This button is used to
momentarily freeze projection so
that a still picture is displayed.
5 D.ZOOM +/- buttons
(page 29)
These buttons are used to
enlarge the projected image.
6 VOLUME +/- buttons
(page 29)
These buttons are used to adjust the
volume of the sound that is output
from the projector's built-in speaker
and AUDIO OUT jack. Refer to page
44 for details on how to adjust the
volume using the buttons on the
projector control panel.
7 FUNC1 (function) button
(pages 41,44 and 46)
This button can be used for 1)
switching on and off the sound
volume and 2) entering into the
keystone distortion correction mode.
Use the FUNC1 item in the OPTION
menu to select which you wish to use.
8 STD (standard) button
(page 36)
This button is used to reset the
projector adjustment values to the
factory default settings.
9 Operating mode (Computer,
Projector) select switch
(page 31)
Move this switch to the left side to
use the remote control unit to
operate a computer, and move it to
the right side to operate the projector.
E
-15
NGLISH
Publicité
Table des Matières
