Principles; Safety Instructions; Conformity With Standards; Field Of Application - Eaton CROUSE-HINDS Serie Mode D'emploi

2.

Principles

Warning
This symbol warns of a serious hazard. Failure to observe this
warning may result in death or the destruction of property.
Caution
This symbol warns of a possible failure. Failure to observe this
caution may result in the total failure of the device or the system or
plant to which it is connected.
Note
This symbol highlights important information.
X
Special conditions
ATEX - IEC
This symbol shows Highlights for safe use in accordance to EU-Type-Exa-
mination Certificate/ IEC Ex-Certificate of Conformity.
i
Information

2.1. Safety instructions

Target group:
For skilled electricians and suitable qualified, instructed
personnel in accordance with national legislation,
including the relevant standards and, where applicable,
in acc. with IEC/EN 60079-17 on electrical apparatus for explosive
atmospheres.
- The battery pack must not be operated in zone 0 or zone 20
hazardous areas!
- The technical data indicated on the battery pack is to be observed!
- Changes or modifications to the battery pack are not permitted!
- The battery pack is only to be used as intended and in undamaged
and correct working order!
- Only genuine Cooper Crouse-Hinds / EATON parts are to be used!
- Repairs that affect the protection against explosion, may only be
performed by Eaton/Cooper Crouse-Hinds / EATON or a qualified
electrician (see relevant national regulations)!
Observe the national health and safety regulations for prevention of
accidents that are marked with a (
3.

Conformity with standards

The apparatus is conform to the standards specified in the EU-Declaration
of conformity, enclosed separately.
References to standards and directives in these operating instructions
always relate to the latest version. Other additions (e.g. details relating to
the year) shall be observed.
Battery pack NE+ for ExLin NE+
) in these operating instructions!
4.

Field of application

The battery pack pluged into the light fitting ExLin NE+ is suitable for use
in zone 1, 2 or 21, 22 hazardous areas acc. to IEC/EN 60079-10-1 and
IEC/EN 60079-10-2.
The materials used, including any external metal parts, are high quality
materials which ensure a corrosion protection and resistance to chemical
substances corresponding to the requirements in a "normal industrial
atmosphere":
- glass-fibre reinforced polyamid
- Polycarbonate (display)
In case of use in an extremely aggressive atmosphere, you can obtain
information concerning the chemical resistance of the materials used
from your Cooper Crouse-Hinds (CCH) / EATON branch.
5.

Application / Properties

The battery pack for the ExLin NE+ luminaire supplies it with energy in the
event of an emergency via the VE+ supply unit and a qTEK 300-1. driver.
Both are built into the ExLin NE+ luminaire ex works.
A LiFePO4 battery is used as the energy storage device.
At low temperatures, the battery pack is heated with a built-in heater. This
means that the specified data is guaranteed.
The data as per point 3 and 4 shall be taken into account with the
use.
Applications other than those described are not permitted
without Cooper Crouse-Hinds / EATON's prior written consent.
The instructions stated in section 9 of the operating instructions
shall be observed during operation.
The user alone is responsible for the appropriate use of the light
fitting ExLin in consideration of the basic conditions existing at the
plant (see technical data).
The product is protected by patents. For more information, please contact
your local Cooper Crouse-Hinds / EATON representative.
6.

Transport / Storage

6.1

Transport

The battery pack for the ExLin NE + luminaire may be transported in its
original packaging in areas with an explosive ambient atmosphere in
zones 1, 2 and 21, 22.
The battery pack in its original packaging is tested for air freight
accordance to UN 38.3.
GB
9