Camera Setup - Panasonic WV-CU161 Mode D'emploi

CAMERA SETUP

You can use the WV-CU161 to setup the camera from the
Camera Setup menu.
For further information, refer to the Operating Instructions
for the individual combination cameras.
Camera Setup
1. Press the CAMERA SETUP/SETUP/PROGRAM button
for 2 seconds or more to access the Camera Setup
menu. The CAMERA SETUP indicator lights up.
CAMERA
SETUP
SETUP
PROGRAM
2. Select an item and parameter by pressing numeric but-
tons 2, 4, 6 and 8.
3. Press the PRESET/SET/PROGRAM PRESET button to
execute the parameter or enter a submenu.
4. To return to the previous menu, press the HOME/ESC
button.
5. Press the CAMERA SETUP/SETUP/PROGRAM button
for 2 seconds or more to complete the Camera Setup.
30
All manuals and user guides at all-guides.com
(Example of Camera Setup menu)
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE AUTO PAN
AUTO PAN KEY SEQ
DIGITAL FLIP OFF
LOCAL/REMOTE LOCAL
SPECIAL1
CAMERA
RS485 SET UP
1 2 3
4 5 6
7 8 9
HOME PRESET
0
ESC SET
PROGRAM
PRESET
PRESET
SET
PROGRAM
PRESET
HOME
ESC
CAMERA
SETUP
SETUP
PROGRAM
Notes:
• To display the special menu, move the cursor to [SPE-
CIAL] on the Setup menu, and press numeric buttons 4
and 6 simultaneously for 2 seconds or more.
• To restore all defaults, move the cursor to [CAMERA
RESET]* on the Setup menu, and press buttons 4, 5
and 6 simultaneously for 2 seconds or more.
* The menu to restore the camera defaults differs
depending on the camera:
[SPECIAL] for the WV-CS654, [SPECIAL 2] for the WV-
CS854, and [END] for fixed cameras, etc.
Caution: If camera setup is started using the buttons
on the camera, all future operations for setup must
be performed with buttons.
If camera setup is started using the System
Controller, all future operations for setup must be
performed using the same controller.
Note: For further information, refer to the Operating
Instructions for the selected camera.
Keys Used in Camera Setup Menu
CAMERA SETUP/SETUP/PROGRAM button:
To display a program menu by pressing CAMERA
SETUP/SETUP/PROGRAM button 2 seconds or more.
CAMERA
SETUP
SETUP
Numeric buttons:
To move the cursor.
To select modes.
CAMERA SETUP/SETUP/PROGRAM button:
To enter a submenu.
CAMERA
SETUP
SETUP
HOME/ESC button:
To return to the previous menu.
HOME
PROGRAM
8
2
4 6
PROGRAM
ESC