Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
EN
30
DAB: DLS (Dynamic label segment is a scrolling message that the
broadcaster may include with their transmissions. This message usually
includes information, such as program detail etc.) - Signal strength -
Program Type - Ensemble/Multiplex (A multiplex/ensemble is a collection
of radio stations that are bundled and transmitted on one frequency. There
are national and local multiplexes. Local ones contain stations that are
specific to that area e.g. MXR West.) - Channel (current frequency) - Mode
(current mode) - Time&Date .
BT
The BT function can be used to stream music from any BT device such
as smartphones or tablets, but does not support hands free telephone
operation.
Switch the V-20 on and press SOURCE to switch to BT mode.
Activate BT on your BT device and pair with the V-20 DAB.
Use your BT device to operate audio/media playback or use th V-20
buttons
/
Type in "0000", if prompted to enter a password.
NFC: When enabled on the transmitting audio device; all that is required
is for you to touch the NFC logo on the front of the micro system with
the NFC hotspot on your compatible audio device. Enable NFC on your
audio device (such as a mobile phone). Touch the NFC hot spot on your
audio device to the NFC logo on the front of the micro system. You may
need to move the device around slightly to hit the exact contact point.
When the connection is made, a melody is played and the 'BT-LINK' text
on the display will stop flashing and the device will be automatically
connected.
To remove a paired device using the micro system, press and hold the
UNPAIR/ENTER button on the micro system or press the UNPAIR button
on the remote The 'BT LINK' text will begin flashing again.

AUX

Aux-In: Use a 3.5 mm audio cable to connect external media/audio players
to the AUDIO IN socket on the rear. Press SOURCE repeatedly to switch
to AUX mode. Operate the playback on your external device. If using the
headphone out, set it to about 70% volume, to avoid hum. Adjust the output
volume on the V-20, then.
/
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1002992610031466100314671003633910036340

Table des Matières