Special 1 Menu Setting (Special 1) - Panasonic WV-CW864A Mode D'emploi

■ Special 1 Menu Setting
(SPECIAL 1)
● Privacy Zone (PRIVACY ZONE)
Up to 8 unwanted zones can be masked on the monitor
screen.
1. Move the cursor to PRIVACY ZONE and select ON
or OFF with the joystick. Press the CAM (SET) key to
display the ZONE NUMBER setting menu.
** SPECIAL 1 **
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
** ZONE NUMBER 1/8 **
RET
ON: Preset privacy zones are veiled on the monitor
screen.
OFF: The veiling function does not work.
2. Select a zone number with the joystick, and press
the CAM (SET) key.
• A zone number followed by * (asterisk) indicates
that the zone has already been registered.
** ZONE NUMBER 1/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
• When a zone number having no * is selected, the
picture is zoomed out fully.
• When a registered zone number is selected, the
camera moves to the preset position. Note that if
you move PAN/TILT, ZOOM/FOCUS or ZONE
SCALE in that position, the registered zone number
having "*" is cancelled.
• The zone frame appears in the center of the screen
if 3 or fewer mask areas exist in that picture and if
the zone number is not registered yet.
OFF
ON
OFF
STOP
OFF
ON
OFF
OFF
0°
→PUSH SET
→PUSH SET
••••|••••
L H
• The privacy zone may appear on the monitor screen
depending on the direction of the camera.
• The privacy zone function will not work at start-up
immediately after turning the power on.
3. To register a new zone
3-1 For PAN/TILT, move the cursor to PUSH SET and
press the CAM (SET) key.
** ZONE NUMBER 3/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
3-2 Adjust the pan and tilt position so that the
desired position comes into the zone frame with
the joystick.
** ZONE NUMBER 3/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
3-3 For ZOOM/FOCUS, move the cursor to PUSH
SET , and press the CAM (SET) key.
** ZONE NUMBER 3/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
3-4 Adjust zoom and focus, and press the CAM
(SET) key.
Zoom can be adjusted within the range of 1 to 10
magnifications.
3-5 Move the cursor to ZONE SCALE, and move the
joystick to the right or left to adjust the zone
frame. Press the CAM (SET) key after the adjust-
ment.
-27-
→PUSH SET
→PUSH SET
••••|••••
L H
→PUSH SET
→PUSH SET
U TILT D/L PAN R
••••|••••
L H
→PUSH SET
→PUSH SET
U ZOOM D/L FOCUS R
••••|••••
L H