Operation; Product Specification - Haier HPAC9M Mode D'emploi

Operation

1. Wait 20 minutes before starting the unti to assure that the coolant has leveled off.
2. Wait 3 minutes before restarting the unit after a normal shutdown so as to complete
the compressor cycle.
3. Use an 115 volt 20 amp outlet for the air conditioner. Do not use any other electrical appliances
on this line or you may trip the fuse. Dedicate the electric line for the air conditioner alone.
4. Do not place the air conditioner in direct sunlight or close to any heating appliances.
eg. baseboard heaters, stoves, etc.
5. Operate the unit on a flat surface only.
6. Check the filter at least once a month in order to acheive highest cooling efficiency.
7. If the unit is not being used for a long period of time, please remove the plug to drain pipe and
drain out any condensed water.

Product Specification

Voltage and Frequency
Input Power
Cooling Capacity
Moisture Removal (pints/hr)
Coolant
Timer
Operating Temperature Range
Unit Dimensions (WxDxH) (inches)
Net Weight lbs. approximate
All manuals and user guides at all-guides.com
115V / 60Hz
750 W
9000 BTU
1.31/hr
R22
8 Hours
64.4˚F - 95˚F
20 1/4 x 13 13/32 x 29 13/16
71.5 lbs.
English
(7)