GGP ITALY B 28 Manuel D'utilisation page 25

SYMBOLS
2. SYMBOLS
1 2
6 7
1) Warning! Danger. The failure to use this machi-
ne correctly can be hazardous for oneself and oth-
ers.
2) Read the instruction manual before using the
machine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise le-
vel of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
4) Wear gloves and protective footwear!
5) Danger of flying objects! Keep any people or
pets at least 15 m away when using the machine!
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
11
a
12
b
c
13
14
All manuals and user guides at all-guides.com
3
8
11) Fuel tank
12) Engine stop switch
positions
a = stop
b = run
c = start
13) Choke
14) Primer
4
9 10
6) Maximum cutting device speed. Only use sui-
table cutting devices.
7) Do not use the circular saw blade. Danger:
Using the circular saw blade with machines
marked with this symbol exposes the user to
the danger of very serious or even fatal in-
juries.
8) Warning! Petrol is flammable. Allow engine to
cool at least 2 minutes before refuelling.
9) Warning! Keep away from hot surfaces.
10) Beware of blade thrust.
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)
21
22
3
EN
5
21) Cutting device
with adequate
protection
22) Cutting device
rotation direction