Adjusting Picture Quality - JVC D-ILA DLA-G150CLU Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DLA-G150CLU&CLE_Eng.book Page 49 Thursday, February 21, 2002 2:39 PM

Adjusting Picture Quality

In the "Image adj." submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the
adjustment items differ in Video menu mode and PC menu mode.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Image adj." with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Image adj." submenu appears on the screen.
Video submenu
Image adj.
Contrast
Brightness
Color
Tint
Sharpness
All reset
3
Select the item to be adjusted with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
*"Color" and "Tint" are shown in Video submenu only.
4
Make adjustment with the cursor 2 2 2 2 or 3 3 3 3 .
*To adjust multiple items, repeat 3 and 4.
Adjustment item
Contrast
Brightness
Color
Tint
Sharpness
All reset
* : Factory set value
I To perform All Reset
• In the Image adj. submenu, select "All reset" with the cursor button 5 or ∞, and press the ENTER button. Then, the "All
reset" submenu appears on the screen.
• Press the cursor button 2 to select "Yes", and then press the ENTER button.
• All items in the "Image adj." submenu are reset to the factory set values and the menu returns to the previous one.
To exit the "All reset" submenu without performing All reset, select "No" with the cursor button 3 and, press the ENTER
button.
(To be continued on the next page)
12
12
12
12
1
ENTER
Button
2 or 3
Gets lower/higher. (–30 ↔ 0* ↔ +30)
2 or 3
Gets darker/brighter. (–30 ↔ 0* ↔ +30)
Gets softer/deeper. (–30 ↔ 0* ↔ +30)
2 or 3
(Video menu mode only)
Gets reddish/greenish. (–30 ↔ 0* ↔ +30)
2 or 3
(Video menu mode only)
Gets softer/sharper.
• Video menu mode: (–5 ↔ 0* ↔ +5)
• PC menu mode: (1 ↔ 3* ↔ 5)
2 or 3
Note
• When in the PC menu mode, if the resize function in the PC submenu is set to
"1:1", the image quality will not change even if the value is changed.
Resets above items to the factory set values. How to operate is mentioned below
ENTER
(next page).
DLA-G150CLU / LCT1123-001B / ENGLISH
PC submenu
Image adj.
Contrast
12
Brightness
12
Sharpness
1
All reset
ENTER
Adjustment content
Menu Operations
2
3
4
5
49

Publicité

Table des Matières
loading

Table des Matières