JVC D-ILA DLA-G150CLU Manuel D'instructions page 42

DLA-G150CLU&CLE_Eng.book Page 40 Thursday, February 21, 2002 2:39 PM
Menu Operations
.
I
Quick Reference Guide for Video Menu Mode
Main Menu in Video Menu Mode (While receiving video-device-related signals)
→
Image adj. (Refer to page 49)
Contrast:
Brightness:
Color:
Tint:
Sharpness:
All reset:
Set up 1
Position:
Gamma:
Aspect ratio
Decoder:
Page 2
Color temp.
Color temp.:
RED:
GREEN:
BLUE:
All-reset:
→
Options (Refer to page 54)
Options 1
Menu display:
Line display:
Lamp time display:
Keystone:
Lamp control:
Page 2:
Language
Japanese / English* / German / Spanish / Italian / French
→
Information (Refer to page 56)
Input:
Switcher:
Source:
Lamp time:
* : Factory set value.
40
Contrast of the video image being projected can be adjusted. (–30 to +30, 0*)
Brightness of the video image being projected can be adjusted. (–30 to +30, 0*)
Color density of the video image being projected can be adjusted. (–30 to +30, 0*)
Tint of the video image being projected can be adjusted. (–30 to +30, 0*)
Sharpness of the video image being projected can be adjusted. (–5 to +5, 0*)
Resets above items to the factory set values.
Yes / No
Video screen position and menu position can be adjusted.
Disp. Posi. / Menu
Image tone can be changed. Down/Cinema*/Up (Suitable for the cinema programes)
page 52)
Selectable aspect ratio, 4:3*/16:9.
Selectable color systems, Normally, set to AUTO. (Refer to page 45)
(This item is displayed only when inputting VIDEO or Y/C.)
AUTO*/NTSC/NTSC4.43/PAL/SECAM
Press ENTER to enter the "Set up 2" submenu
Tracking: Normally, no adjustment is required. The lateral size and display area of video image can be
adjusted. (–128 to + 127)
Deinterlace: Set when watching movies which were recorded on film.
Flickering or dim picture image can be adjusted. (0 to 31) → (Refer to page 47)
Phase:
Screen:
Selectable screen's aspect ratio. 4:3*/16:9
HDTV: Selectable HDTV format. Normally, set to 1080i, 1080i*/1035i
Page 1: Press ENTER to return to "Page 1" submenu.
Adjustable color temperature, Low/Middle*/High.
Will be adjusted to correct reddish or blueish image.
Adjusts the red level. (0 to 255, the adjustable range varies depending on signals)
Adjusts the green level. (0 to 255, the adjustable range varies depending on signals)
Adjusts the blue level. (0 to 255, the adjustable range varies depending on signals)
Reset above items to the factory set values.
Yes/No
15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
5sec* (Line display such as "VIDEO", "Y/C", "PC1", or "PC2" appears on top right of the screen for
5 seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not appear.)
ON*: Displays when the lamp use time reaches 1000 hours when set in the LPC or LOC mode.
OFF: Does not display when the lamp use time reaches 1000 hours when set in the LPC or LOC mode.
Press ENTER to enter the Keystone submenu.
Keystone: Adjust to correct the trapezoidal distortion of the projected image.
(–80 to +120, 0*)
Normal*: Used as a normal lamp.
LPC: Lamp brightness is automatically controlled with time.
LOC: Lamp brightness is controlled in 7 levels (-6 to 0) irrespective of the time. This is set within the menu.
Press ENTER to enter the "Page 2" submenu.
Flip H.: OFF* / ON (Select for upside-down hanging on the ceiling.)
Flip V: OFF* / ON (Select for upside-down hanging on the ceiling.)
RS-232C [bps]: Selectable baud rate (transmission speed). 9600 / 19200*
Sleep time [min]: Selectable sleep times. If no-signal condition continues for the period of
selected time (Unite: Minutes), the projector enters the stand-by mode. 15 / 30
/ 60 / OFF*
Page 1: Press ENTER to return to the "Page 1" submenu.
Language for on-screen display.
Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO, COMP, PC1, PC2 or DVI)
Has no meaning. This display currently has no meaning, ("CH.0" is usually displayed to indicate
that it is not being used.)
Shows the projected image's type of video signal.
Accumulated used hours of the light-source lamp.
DLA-G150CLU / LCT1123-001B / ENGLISH
→
→
(Refer to page 52)
→
(Refer to page 47)
→
(Refer to page 46)
→
(Refer to page 46)
(Refer to page 51)
→
(Refer to
→
(Refer to page 46)