Installing The Projector Against The Screen - JVC D-ILA DLA-G150CLU Manuel D'instructions

DLA-G150CLU&CLE_Eng.book Page 17 Thursday, February 21, 2002 2:39 PM

Installing the Projector against the Screen

The projector should be placed so that the center line of the lens is at a right angle to the screen as shown in the following
figures.
I
Side view
I
Trapezoidal-distortion correctable maximum angle
The projector has a function to correct the trapezoidal distortion of the projected image on the screen.
To correct this distortion, use the KEYSTONE buttons on the projector. (Refer to "Removing the Trapezoidal Distortion of the
Image" on page 35.) Also, correction is possible by using the "Keystone" menu. (Refer to "Setting and Adjusting Other
Functions (OPTIONS)" on page 54.)
Correctable angle:
Up to approx. 20° upward from the horizontal line
DLA-G150CLU / LCT1123-001B / ENGLISH
I
Top view
Correctable angle:
Up to approx. 20° downward from the horizontal line
Installing the Projector
17