Cleaning To Be Carried Out By The User - Lincar Monellina Manuel D'instructions Et D'entretien

3 MAINTENANCE AND CLEANING
RESERVED TO USER

Cleaning to be carried out by the User

3.1
The frequency of the stove cleaning and maintenance is depending from pellet quality an
•
quantity. An high degree of humidity, ash, powder or chemicals adds inside the pellet
could increase the necessary cleaning and maintenance operations; so we recommend
again to employ a very high pellet quality
Burner Tank Cleaning : To obtain the best performance during stove's functioning,
•
EVERY DAY it's necessary to clean the burner tank. Remove the tank and empty it
from every residuals, clean all the holes on the bottom and replace it into the stove being
careful to the position of starting glow plug.
Ordinary Cleaning about combustion room : The combustion room has to be checked
•
to insure that air feed is regular. The combustion room can be cleaned with a vacuum
cleane (Fig. 2).To scrape off the scale with the appropriate piece of equipment (Fig. 3)
Fig 2
After having remove the burner basket
to scrape off the scale, replace it
verifying that the hole of big dimension
has to be correspondence with glow up
tube (Fig. 4)
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 156P PLUS - 176PL PLUS 2018
GB GB FR FR ES ES
Fig 3
Fig 4
48/108