Lincar Monellina Manuel D'instructions Et D'entretien page 36

DIMENSIONS FOR EXAUST TUBE CONNECTION AND AIR SUCTION
Attention to stove model.
•
In case that it's necessary to make hole in wall for exhaust fume, proceed as follows :
•
Measure and draw with real dimension on the wall the points for stove connection;
−
Realize the hole on the wall.
−
Connect the stove to the flue with the tube for exhaust fume.
−
Mod. 156P PLUS
In case that the exhaust tube has a connection position not horizontal (f.e.up connection )
•
it's necessary to maintain a security distance of exhaust tube from wall of 100 mm
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 156P PLUS - 176PL PLUS 2018
GB GB FR FR ES ES
Mod. 176PL PLUS
36/108