Lincar Monellina Manuel D'instructions Et D'entretien page 40

INFORMATION ABOUT PELLETS
Pellets is made by wood rejection that came from saw-mill or planning industry and
•
wood fragment of forest industry. This raw material is shattered, dried up, crushed, with
some bound material till up to become the pellet combustible.
PELLETS PRESERVATION
Pellet has to be kept in a dry and clean environment.
•
Starting
2.3
The appliance should set at work only after having completed the following operations:
•
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
stove needs to complete the drying process of the paint. During the first heatings you can
notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
WOOD PELLET LOADING
Be careful during wood pellet loading operation ! The pellet bag should not touch the
•
warm stove.
Be careful that no external corps enter into the pellet tank as pieces of bag, wood pieces
•
or other that can obstruct the screw feeder and damage it.
The wood pellet loading should be done at the top, after having removed the cover.
•
During stove functioning, it's advisable to employ the specific glove because the stove
surface could reach high temperature.
To check always the level of combustible in the combustible tank and check-it often, to
•
avoid the light off of the stove.
The cover tank has should be always closed, except during pellet loading.
•
Tank Pellets capacity : information on Technical details part
•
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 156P PLUS - 176PL PLUS 2018
GB GB FR FR ES ES
40/108