Lincar Monellina Manuel D'instructions Et D'entretien page 44

C PROGRAM / HOUR CHECK. Push the button 3 (SET) till on display appears the
initials :
Push the button 1 and 2 to program with right data and push the button 3 (SET) to
confirm.
E TO PROGRAM FIRST IGNITION HOUR / TURNING OFF
Push the button 3 (SET) till on display appears the initials:
F Push the button 3 (SET) till on display appears the initials:
G AUTOMATIC IGNITION. It's necessary to select the week's day during the automatic
ignition should be programmed then push the button 3(SET) till on display appears the
initials :
Button 1 = to visual the week day (on/off 1..7).
Button 2 = to modify the programmed condition from On to Off or the contrary
ON = Activated
OFF = Deactivated
In the enclosed example : the program is activated on Monday, Thursday, Friday,
Saturday and Sunday.
IT IT IT IT- - - - GB
For hour
D Only for technical program, reserved to technician and qualify
staff. Keep the initials on 00, push the button 3 (SET) .
Use the button 1 and 2 to program the
ignition hour desired, and the Button 3
(SET) to confirm.
To set up OFF to not have an ignition time.
Use the button 1 and 2 to program the
turning off hour desired, and the Button
3 (SET) to confirm.
To set up OFF to not have a switch off time.
ATTENTION !! To confirm with the button 3 (SET) ONLY AFTER
having programmed every week's day with the button 1 and 2.
GB- - - - FR FR- - - - ES ES mod. 156P PLUS - 176PL PLUS 2018
GB GB FR FR ES ES
44/108
For minutes