Assembly Instructions - Christopeit Sport AX 6000 Notice De Montage Et D'utilisation

ASSEMBLY INSTRUCTIONS

Remove all the separate parts from the packaging,
lay them on the floor and check roughly that all are
there on the base of the assembly steps. Please note
that a number of parts are connected directly to the
main frame preassembled. In addition, there are sev-
eral other individual parts that have been attached to
separate units. This will makes assembly easier and
quicker for you. Assembly time: 50 min.
STEP 1:
Attach the stabilizer (56+58).
1. Attach the front stabilizer (56) assembled with
front caps with transportation roller (55) to main
frame (40) by using bolts M8x45 (59), washers (37),
spring washers (32) and cap nuts (36).
2. Attach the rear stabilizer (58) assembled with
height adjustable caps (57) to main frame (40) by us-
ing bolts (59), washers (37), spring washers (32) and
cap nuts (36). (For uneven floor, you can adjust the
height at rear caps (57) and secure for stable posi-
tion.)
STEP 2:
Assembly of pedal cranks (97) and crank covers (95).
1. Put the pedal crank (97) at pedal crank holder
(93) so that the holes align and screw it tightly by us-
ing screw M8x20 (96) and spring washers (32).
2. Put the crank cover (95) onto the pedal crank
(97) and attach it by using screws M5x15 (102).
3. Attach the crank plug (94) at crank cover (95).
14
GB