Reolink PoE Dome Camera Mode D'emploi page 5

1
2
7 English
To separate mounting plate from the
dome camera, hold and press on the
camera top and turn anticlockwise.
Drill holes according to the mounting
hole template and screw the
mounting plate to the mounting
holes on the ceiling.
NOTE: Use the drywall anchors
included in the package if needed.
1
2
3
4
Mount the camera to the mounting
plate and turn the camera clockwise
to lock it tightly. If the camera is not
locked properly, the camera may
fall when you turn it anticlockwise to
adjust the surveillance angle.
NOTE: Run the cable through the
cable notch on the mount base.
Once the camera is installed, you
may rotate the camera body
manually to adjust the camera's
surveillance angle.
English 8