Error Correction - Parkside PHS 160 E5 Traduction Des Instructions D'origine

GB IE
Trouble Shooting
Problem
Device doesn't start
Device works with
interruptions
Engine is slowing
down and stops
Poor grinding
performance
Sanding sheet wears
down quickly
30
All manuals and user guides at all-guides.com
Possible Cause
Mains voltage missing
Main circuit breaker is
tripped
On/off switch (
be defective
Engine faulty
Internal loose contact
On/off switch (
broken
Device is overloaded
through workpiece
Sanding sheet unsuitable
for the workpiece to be
processed
Worn sanding sheet
Sanding sheet unsuitable
for the workpiece to be
processed
Too much pressure applied

Error correction

Check the socket, mains cable, line,
mains plug, repairs to be carried
out by qualiied electrician if neces-
sary, check main circuit breaker.
1) may
Repair by Customer Care
Repair by Customer Care
1) is
Reduce pressure on grinding tool
Workpiece unsuitable
Use a suitable sanding sheet or
sanding disc (see "Assembling in-
structions")
Insert a new sanding sheet
(see "Assembling instructions")
Use a suitable sanding sheet
(see "Assembling instructions")
Reduce the pressure