SOUNDMASTER SCD1700 Manuel D'instructions page 17

➢ Intro function – The first 10 seconds of the tracks are played. Then the device changes to the
next track – The display shows "INTRO".
➢ Normal playback mode.
Programmed play
This can be used to program any desired sequence of tracks.
1. Press the "STOP / ENTER" button.
2. Press the "MODE / PROG" button. "P01
program number, T--001 means track number).
3. Use the "SKIP+ / TUNE+" or "SKIP- / TUNE-" buttons to select the desired track and press
the "MODE / PROG" button again. The display "P01" change to "P02".
4. Select the next track with the "SKIP+ / TUNE+" or "SKIP- / TUNE-" buttons and press the
"MODE / PROG" button again. Repeat the procedure until all the desired tracks are
selected.
NOTE: Once the storage capacity of the tracks to be programmed has been reached
"FULL" will show in the display (CD = max 20 tracks, MP3-CD or USB = max 99 tracks).
5. Press the "STOP / ENTER" button to start the programmed playback. The upper-left of the
display will show "MEM".
6. Press once the "STOP / ENTER" button to stop the playback while retaining the program.
7. To play the programmed back again, press the "PLAY / PAUSE / SCAN" button.
8. To delete the program, press the "STOP / ENTER" button twice. The notification "MEM" will
disappear.
This device has been developed in line with the latest technical advances in the USB field. The
wide range of different USB storage devices of all types which are currently on the market,
unfortunately do not allow us to guarantee full compatibility with all USB storage devices. For
this reason, in rare cases there may be problems in playing back files from USB storage
devices. This is not a malfunction of the device.
1. Press repeatedly the "STANDBY / SOURCE" button, until "USB" is shown in the display.
2. Connect a USB storage device directly into the port. Playback will automatically start after a
few seconds.
The control functions, repeat functions and programmed play are the same as in CD mode.
Note:
•
Always directly connect a USB storage medium to the USB port to prevent any
malfunctions.
•
The USB port is not designed for charging external devices.
CAUTION: Switch the device to a different operating mode before you remove the USB storage
device.
SCD1700 / English Instruction Manual
T--001" is shown in the display (P_01 means the
USB
6