Start Delay - GE GSM2200N15BB Manuel Du Propriétaire

Operation of models with cycle dial
Rinse Only
For rinsing partial loads that will be washed later. Do not use detergent.
Plate Warmer or Drying
For warming clean dishes and serving plates. This cycle will take approximately 39 minutes.
Hot Start or Hot Prewash Option
Preheats wash water.

Start Delay

The START DELAY will allow you to delay the start time of any cycle automatically up to 6 hours.
Start
Slowly turn the Dial to the START or ON position, or the selected cycle. Don't turn it past the START,
ON or cycle position; you could accidentally miss a prewash.
There is a time delay between start-up and water fill so you will not hear any wash action right
away.
Make sure HEATED DRY is not selected.
1
Be sure the door is unlatched.
2
Load clean dishware to be warmed.
1
Select HEATED DRY ON.
2
Be sure the door is unlatched.
3
Select the HOT START or HOT PREWASH
1
cycle and any other option on the push
button pad.
Be sure the door is unlatched.
2
Short Wash or Light Wash or Water Saver
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
Be sure the door is unlatched.
1
Slowly turn the Dial to SHORT WASH,
2
LIGHT WASH or WATER SAVER.
(on some models)
Be sure the door is unlatched.
1
Select the wash cycle and option you want.
2
(Models with a Dial)
I
Latch the door to begin the cycle.
Slowly turn the Dial to RINSE ONLY.
3
Latch the door to start the cycle.
4
Slowly turn the Dial to PLATE WARMER or
4
DRYING.
Latch the door to start the cycle.
5
Slowly turn the Dial to HOT START or
3
HOT PREWASH.
Latch the door to start the cycle.
4
Latch the door to start the cycle.
3
Slowly turn the Dial to the desired time.
3
The CYCLE ON light will come on.
Latch the door to start the cycle.
4
geappliances.ca
7