Klarstein Kingsize Kamado Mode D'emploi page 25

9
Step 10: To attach the handle (10) to the lid of the Kamado Grill (9) start by attaching
2x handle brackets (1 1) using the 2x pre-attached bolts and dome headed
nuts. Attach the handle (1 1) to the brackets (10) using 2x bolts (C) and nuts (E).
.
12
E
Step 11: To attach the top vent (12) to the Kamado Grill (9) place it on top and align
both the bolt holes. Secure using 2x bolts (D) and nuts (E). Ensure that the top
vent bolt is on the left hand side when assembling it.
Step 12: Attach the 2x table brackets (14) to the Kamado Grill (9) using the 4x pre-
attached bolts and dome headed nuts per bracket. Please note the position
shown in the above diagram.
Step 13: Attach the 2x table brackets (15) to the Kamado Grill (9) using the 4x pre-
attached bolts and dome headed nuts per bracket. Please note the position
shown in the above diagram.
10
E
C
D
9
EN
25