Grandstream CONNEX GRP2634 Guide D'installation Rapide page 5

PHONE CONFIGURATION:
Configure the GRP2634 using a Web Browser:
1. Ensure your phone is powered up and connected to the Internet.
2. Press and hold the "UP" button for 3 seconds to see the IP address.
3. Type the phone's IP address in your PC browser.
4. Enter admin's username and password to access the configuration menu.
(The factory default username is "admin" while the default random password
can be found on the sticker at the back of the unit).
Configure the GRP2634 using the Keypad:
1. Make sure the phone is idle.
2. Press the MENU key to access the keypad MENU to configure the phone.
3. Select MENU → Phone → SIP → Account to configure settings for SIP Proxy,
Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password.
4. Follow MENU options to configure the basic features of the phone. For ex-
ample: the IP address if using a static IP. For details, please check GRP2634
series User Manual.
5. Please contact your ITSP for additional settings that may be necessary to
configure the phone.
The GNU GPL license terms are incorporated into the device firmware and
can be accessed via the Web user interface of the device at
http(s)://IP/gpl_license.
To obtain a CD with GPL source code information please submit a written
request to info@grandstream.com
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
This product is covered by one or more of the U.S. patents (and any foreign patent
counterparts thereto) identified at www.cmspatents.com.
~5~
ZH
GRP2634不预设对医院，执法机构，医疗中心(急救
服务)以及各种紧急服务的紧急通话服务。用户必
须自行设定紧急通话功能。用户必须自行购买SIP兼
容的网络电话服务，正确地设定GRP2634使用该服
务，并定期测试您的配置以确保 GRP2634 如预期工
作，否则请购买传统无线或有线电话服务来拨打紧
急通话。
Grandstream Networks 公司的 GRP2634 不支持紧急
通话服务。Grandstream Networks 公司、其管理者和
员工以及其相关机构对此所造成的任何索赔、损失
或者损害都不负有任何法律追究责任。在此，您将
无权对任何以及所有由于无法通过GRP2634拨打紧
急电话以及没有遵照前 段文字描述而造成紧急通话
失败的事件提出诉讼。
~6~