Hendi 281444 Mode D'emploi page 7

Masquer les pouces Voir aussi pour 281444:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
Operation
Control panel of the microwave
1) Different power level and defrost
2) Time Entry
3) Double quantity
4) Pause
5) Start
6) Number Keyboard (Button "1" is also used
for programming mode and multi stage
cooking mode)
Power Up
When plug into the socket, "- - - -" will be shown on the display. It will disappear in 1 minute of inac-
tivity. Then, the microwave will enter into the Idle Mode.
Idle Mode
During idle mode, the screen is blank and there will be no oven activity. Opening and then closing the
oven door will activate the Ready Mode. The oven will enter idle mode after a minute of no use, The
time it takes to activate idle mode can be changed with the 'user options' (Option 4, Timeout Window).
Ready Mode
Opening and closing the door while the oven is in Idle Mode will put the oven into Ready Mode. In this
mode, the oven is ready to either begin a manual or preset cooking cycle. During Ready Mode, 0:00 is
displayed. During Ready Mode, the oven can go to almost all of the other modes.
Door Open Mode
Door open mode is activated by opening the door. During this mode, the screen is blank. And the fan
and oven lamp work. During operation, when the door is opened the program will be paused, the fan
keeps rotating and the light is on.
Manual Entry Mode
Make sure the microwave is under Ready Mode.
Select the time with the '
play will show "00:00", select the requested
time with the number keyboard. After that, se-
lect the power level by pressing [0%/20%(De-
frost)/50%/70%]. The display will show the se-
lected power. If you press again the same power
Pause Mode
This mode allows users to pause the cycle to
inspect or stir the food while the microwave
is operating. Open the door or press the '
' button to pause the cycle. The display will
level button, the power will be set back to 100%
' button, the dis-
power. Also, if no power level button is set,
the power will be default to 100% power. When
everything is set, press the ' ' button, now the
microwave will start operating. At the end of the
cycle the display will show 'End'.
show the remaining time. To resume the cycle,
close the door and press the ' ' button. When
nothing is done the microwave will go into idle
mode within 1 minute.
1)
2)
3)
4)
5)
6)
EN
7

Publicité

Table des Matières
loading

Table des Matières