Husqvarna Soff-Cut 150 Manuel D'utilisation page 26

2. Lift the locking clamp (B).
3. Fold the handle forward (C).
4. Fold the forward pointer up (D).
26
A
C
To lift the product
WARNING: Make sure that the lifting
B
equipment has the correct dimension. The
type plate on the product shows the product
weight.
WARNING: Do not lift a damaged product.
Make sure that the lift point is correctly
installed and not damaged.
WARNING: Do not use metal hooks, chains
or other lifting equipment with rough edges
that can cause damage to the lift point.
• If 2 persons lift the product, use the safety frame bar
on each side of the product and lift with 2 hands.
• If lifting equipment is used, attach the lifting
equipment to the lift point on the safety frame.
Storage
• The product does not have a parking brake. Do not
go away from the product if it is on a slope. If it is
necessary to park the product on a slope, make sure
that the product is sufficiently attached and cannot
move.
• Remove the cutting blade before storage of the
product.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
D
• Keep the cutting blades in a safe area to prevent
damage.
• Keep the cutting blades in a dry and frost-free area.
• Examine new cutting blades for storage damage.
• For storage of the product and fuel, make sure that
there are no leaks or fumes. Sparks or open flames,
for example from electrical devices or boilers, can
start a fire.
• Always use approved containers for storage of fuel.
• Fold the product, refer to
26 .
For long-term storage, also do these steps:
• Clean the product and do a complete servicing.
To lift the product on page
714 - 004 - 06.07.2021