Husqvarna Soff-Cut 150 Manuel D'utilisation page 10

Masquer les pouces Voir aussi pour Soff-Cut 150:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Do not fill fuel in an indoor area. Not sufficient airflow
can cause injury or death because of asphyxiation or
carbon monoxide.
Do not smoke near the fuel or the engine.
Do not put hot objects near the fuel or the engine.
Do not fill fuel near sparks or flames.
Before you refuel, open the fuel tank cap slowly and
release the pressure carefully.
Fuel on your skin can cause injury. If you get fuel on
your skin, use soap and water to remove the fuel.
If you spill fuel on your clothing, change clothing
immediately.
Do not fill the fuel tank fully. Heat causes the fuel to
expand. Keep a space at the top of the fuel tank.
Tighten the fuel tank cap fully. If the fuel tank cap is
not tightened, there is a risk of fire.
Before you start the product, move the product to a
minimum of 3 m/10 ft from where you refueled.
Do not start the product if there is fuel or engine oil
on the product. Remove the unwanted fuel and
engine oil and let the product dry before you start the
engine.
Examine the engine for leaks regularly. If there are
leaks in the fuel system, do not start the engine until
the leaks are repaired.
Do not use your fingers to examine the engine for
leaks.
Keep fuel in approved containers only.
When the product and fuel is in storage, make sure
that fuel and fuel fumes cannot cause damage.
Drain the fuel in an approved container outdoors and
away from sparks and flames.
Exhaust fumes safety
WARNING: Read the warning instructions
that follow before you use the product.
The exhaust fumes from the engine contain carbon
monoxide which is an odourless, poisonous and very
dangerous gas. To breathe carbon monoxide can
cause death. Because carbon monoxide is odourless
and cannot be seen, it is not possible to sense it. A
symptom of carbon monoxide poisoning is dizziness,
but it is possible that a person becomes unconscious
without warning if the quantity or concentration of
carbon monoxide is sufficient.
Exhaust fumes also contain unburned hydrocarbons
including benzene. Long-term inhalation can cause
health problems.
Exhaust fumes that you can see or smell also
contain carbon monoxide.
Do not use a combustion engine product indoors or
in areas that do not have sufficient airflow.
Do not breathe the exhaust fumes.
Make sure that the airflow in the work area is
sufficient. This is very important when you operate
10
the product in trenches or other small work areas
where exhaust fumes can easily collect.
Vibration safety
WARNING: Read the warning instructions
that follow before you use the product.
During operation of the product, vibrations go from
the product to the operator. Regular and frequent
operation of the product can cause or increase the
degree of injuries to the operator. Injuries can occur
in fingers, hands, wrists, arms, shoulders, and/or
nerves and blood supply or other body parts. The
injuries can be debilitating and/or permanent, and
can increase gradually during weeks, months or
years. Possible injuries include damage to the blood
circulation system, the nervous system, joints, and
other body structures.
Symptoms can occur during operation of the product
or at other times. If you have symptoms and
continue to operate the product, the symptoms can
increase or become permanent. If these or other
symptoms occur, get medical aid:
Numbness, loss of feeling, tingling, pricking,
pain, burning, throbbing, stiffness, clumsiness,
loss of strength, changes in skin color or
condition.
Symptoms can increase in cold temperatures. Use
warm clothing and keep your hands warm and dry
when you operate the product in cold environments.
Do maintenance on and operate the product as
given in the operator's manual, to keep a correct
vibration level.
The product has a vibration damping system that
decreases the vibrations from the handles to the
operator. Let the product do the work. Do not push
the product with force. Hold the product at the
handles lightly, but make sure that you control the
product and operate it safely. Do not push the
handles into the end stops more than necessary.
Keep your hands on the handle or handles only.
Keep all other body parts away from the product.
Stop the product immediately if strong vibrations
suddenly occurs. Do not continue the operation
before the cause of the increased vibrations is
removed.
Dust safety
WARNING: Read the warning instructions
that follow before you use the product.
Operation of the product can cause dust in the air.
Dust can cause serious injury and permanent health
problems. Silica dust is regulated as harmful by
several authorities. These are examples of such
health problems:
714 - 004 - 06.07.2021

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Soff-cut 150 d

Table des Matières