YT Industries TUES FR 2011 Instructions De Montage page 14

Adjusting the fork and shock
The suspension elements we use allow for many
adjustments. Please refer to the attached detailed
instructions (Owners Manual) of the suspension
manufacturer "Rockshox" or go to www.sram.com
Basic adjustment
The main criteria for the set up of the rear shock and fork
are: ­ the weight of the rider
­ and his position on the bike
Sag refers to how much a suspension moves under just the
static load of the rider. Sag is the first parameter for adjus­
ting the suspention. At our bikes the sag should be bet­
ween 25 % and 35% of the total travel.
TUES DH: 30-35 %
TUES FR : 25-30 %
You will find the suitable set up for your style by testing
different settings.
Please consider: each adjustment has an influence on the
behavior of the bike – take care of yourself at the first test
rides.
Danger of crashing!
Avoid all settings of suspension elements that will result in
frequent snap­through. The parts will reward that with a
long lifespan.
In case of uncertainty we enjoin you to call upon the
services of YT Industries or RockShox representative
service @ yt­industries.com
Get to know your bike
Familiarize yourself with your new bike! Make sure that all
screws have been tightened with the correct torque, refer
to the attached table.
Our bikes come equipped with modern disc brakes with
extraordinary braking power. The braking power increases
after a short running­in period. Get used to the brake
performance, testing it on different terrain. Position the
brake lever and shifting lever "grip­compatible", so that it
can be pulled without cramping.
Chose a easy, well­known terrain for your first test rides.
Don't forget: only practice makes perfect.
All manuals and user guides at all-guides.com
Before using your bike each time
Mountain bikes are naturally maxed out. Bike parts react
quite differently under load, ranging from wear and tear
to material fatigue. A sudden collapse of single parts
may occur. Regularly check your bike for damage and
periodically take it in for service.
Prior to each ride you should check:
„sag"
Don't ride if one of these deficiencies occurs.
Attention:
During normal use of a mountainbike, vibration occur. This
could leads to loose fittings. (even under use of thread ­
locking fluid.
You had a crash
Crashes are a strain on your bike and its parts. Before you
carry on after a crash, always check your bike for damage
and impaired functioning (also refer to "Before using your
bike each time").
Don't carry on riding if one of these deficiencies occurs.
In case of uncertainty we enjoin you to call upon the
services of YT Industries or a professional bike shop:
info@yt­industries.com.
Riding on public roads in germany
The German traffic regulations (StVZO) stipulate the use
of bicycles on public roads and paths with the following
safety precautions: a brake and lighting system as well as
a bike bell. Furthermore each cyclist is bound to maintain
his/her vehicle in a roadworthy condition. We explicitly
state that our bikes are not road­going (street legal)
according to the German StVZO.
14
The tight fit of wheels in frame and fork and the tight fit
of your seat post
The functioning of your wheels (free movement)
The air pressure in your tires, the tension of the spokes
and the slackness of the hub bearings
The functioning of the brakes
Signs of material fatigue (deformation, fractions, cracks,
damage spots...)
All other components regarding stability and reliability.
The necessary tightening torque of all fittings