Table des Matières
Publicité
1.
Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observan-
ce:
Key word
Probability of
occurrence
DANGER
Immediate impen-
ding danger
WARNING
Possible impending
danger
CAUTION
Possible dangerous
situation
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
Attention
Warns about possible property damage.
!
Information
Practical hints and other
i
useful information.
1.
Multi-step
Instruction consisting of several steps.
2.
operation
One-step
Instruction consisting of one step.
e
operation
Intermediate
An instruction produces a visible inter-
result
mediate result.
Final result
There is a visible final result on com-
"
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
All manuals and user guides at all-guides.com
Severity of danger if ins-
tructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | EL–52425 | 17
2.
User instructions
2.1
Important information
Before commissioning, connecting and operating
Bosch products, it is absolutely essential to read the
entire operating instructions carefully, especially the
safety instructions. By doing so, any uncertainties
in handling Bosch products and associated risks are
avoided in the interests of your own safety and of pre-
venting damage to the products. If a Bosch product
is handed over to another user, the operating instruc-
tions, the safety instructions and the information on
the intended use must be handed over as well.
2.2
Target group
The product may be used only by skilled and instruc-
ted personnel. This requires reading the operating
instructions and the passenger car manufacturer's
repair manual beforehand.
Only technicians or workshop personnel are allowed
to use the product in service locations.
2.3
Safety information
WARNING – Risk of the EL–52425 tipping
over due to overloading.
¶
Only attach the approved targets and
the approved P-Assist S5 laser unit.
¶
Do not attach more than the specified
number of targets.
en
en
|
1 690 386 081
2018-02-22
Publicité
Table des Matières
