The Functions; Operating The Appliance; Preparing Soups - SilverCrest SSK 300 A1 Mode D'emploi

Cuiseur avec fonction mix
Masquer les pouces Voir aussi pour SSK 300 A1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The functions

[
Soupe (épaisse)
Soup (chunky)
You can use this function to prepare soups that
contain small chunks (e.g. vegetable pieces).
The contents are alternately heated and mixed.
After around 30 minutes the appliance stops
automatically.
[
Soupe (fi ne)
Soup (smooth)
You can use this function to prepare creamy soups
in which the ingredients are pureed and practically
no lumps remain. The contents are alternately
heated and mixed. After around 20 minutes the
appliance stops automatically.
Tiédir (Heat-up)
Use this function to re-heat soups that have already
been cooked. The contents are alternately heated
and mixed. After 10 minutes the appliance stops
automatically.
Impulsion (Pulse)
You can use this function to blend or froth up the
contents without heating. To do this, press the PULSE
button t until the ingredients have reached the
desired consistency.
Mixer (Blend)
You can use this function to mix ingredients without
heating them. It can be used, for instance, to prepare
smoothies, milk shakes and crèmes.
Bouillir/vapeur (Boil/steam)
Use this function to cook the ingredients without
mixing.
After around 15 minutes the appliance stops
automatically.
You can also use this function to boil eggs (see
chapter "Operating the appliance").
SSK 300 A1
All manuals and user guides at all-guides.com

Operating the appliance

TIPS
]
]

Preparing soups

1) Insert the plug into a mains power socket.
2) Cut the vegetables into pieces of around 2 cm
3) Fill the blender jug 3 up to no more than the
4) Press the MARCHE/ARRÊT button e. The appli-
5) Press the required button: SOUPE (ÉPAISSE) w
Only use appliance for liquid contents. If you
only add solid ingredients, such as diced
carrots, the blade 4 will not reach and chop
them properly.
The appliance can only work properly in
combination with liquids.
Always fi ll with liquid up to at least the
MINIMUM/0.3 Litres marking.
Fill the appliance with liquid up to the respec-
tive maximum markings (MAXIMUM/1.7 Litres,
SOUPE MAXIMUM/1.2 Litres, VAPEUR
MAXIMUM/0.5 Litres). Otherwise the appli-
ance can overfl ow!
Always fi ll the appliance with ingredients
and liquid up to the respective minimum fi ll
level markings MINIMUM/0.3 Litres, SOUPE
MINIMUM/0.5 Litres. Otherwise the ap-
pliance will not start or will not prepare the
ingredients properly.
After completing the programmes SOUPE
(ÉPAISSE), SOUPE (FINE), BOUILLIR/
VAPEUR and TIÉDIR, programmes, the appli-
ance must be allowed to cool down before
another programme which generates heat
(SOUPE (ÉPAISSE), SOUPE (FINE), BOUILLIR/
VAPEUR, TIÉDIR) can be started.
The appliance emits an acoustic signal.
size and place these in the blender jug 3.
maximum marking SOUPE MAXIMUM/1.2 Litres
with water or stock.
ance emits an acoustic signal. All control lamps
fl ash.
or SOUPE (FINE) u. Two signal tones will
confi rm your selection and the corresponding
signal lamp will fl ash.
GB
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

91022

Table des Matières