Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use the combination wrench to unscrew
and retighten the weights.
One or two weights can be mounted
on each side of the extra weight as
required. Extra weight: 4 kg (8.8 lb)
and 2 kg (4.4 lb).
The maximum allowable extra
weight is 4 kg (8.8 lb). Never use a
heavier extra weight, as this may
damage the unit.
MM 55
All manuals and user guides at all-guides.com
Wheels
The MultiEngine can be equipped with a
set of wheels (special accessory) for
greater mobility. Use only original STIHL
wheels since the use of other wheels
may result in damage to the machine
and personal injury.
Mounting the wheels
2
5
4
3
3 1
1
7
6
7
Turn the power tool on its back so
that it rests on the handles.
:
Fit the two sleeves (1) in the frame.
:
Push the frame onto the flange.
:
Insert the screw (2) with washer (3)
through the hole (4) in the flange.
:
Fit the washer (3) and nut (5) and
tighten down firmly.
:
Insert screws (7) in tapped holes in
frame, push the the notched
adjuster rail (6) towards the handles
while tightening down the screws.
:
The wheels must swing down under
their own weight when the machine
is in the normal working position. If
necessary, loosen the nut (5) a
quarter turn.
English
17
Publicité
Chapitres
Table des Matières
