Stihl MM 55 Notice D'emploi page 27

English
Definitions
1. Fuel pump
Provides additional fuel feed for a
cold start.
2. Carburetor adjusting screws
For adjusting the carburetor.
3. Spark plug boot
Connects the spark plug to the
ignition lead.
4. Starter handle
Handle for starting the engine.
5. Muffler
(with spark arresting screen)
Reduces exhaust noise from the
engine and guides emissions away
from the user.
6. Fuel tank
For fuel and oil mixture.
7. Left Handle
For control of the machine with the
left hand.
8. Control handle
For holding and operating the
machine with the right hand.
9. Throttle Trigger interlock
Must be depressed before the
throttle trigger can be activated.
26
All manuals and user guides at all-guides.com
10. Slide control
For starting throttle, run and stop.
Keeps the throttle partially open
during starting, switches the
engine's ignition off to stop the
engine.
11. Throttle trigger
Controls the speed of the engine.
12. Handlebar
For easy control of the machine with
both hands during cutting work.
13. Knob
Secures the folding handlebar to the
frame.
14. Throttle cable retainer
Secures the throttle cable to the
frame.
15. Loop handle
For transporting the unit.
16. Fuel filler cap
For closing the fuel tank.
17. Air filter cover
Covers the air filter element.
18. Choke lever
Eases engine starting by enriching
mixture.
19. Carrying handle
For transporting the unit.
20. Deflector
Reduces the risk of injury by
deflecting debris or objects away
from the operator.
21. Gearbox
Transmits power from the engine to
the shaft.
22. Shaft
Holds the tools in position.
23. Hitch Pin
Secures the attachments and
simplifies installation and removal of
the attachments.
MM 55