Service Schedule; Handover Confirmation; Service Confirmation - Viking MB 756 GS Manuel D'utilisation

– Engine speed is too low
Remedy:
– Replace the mowing blade (
– Adapt the cutting height and mowing
speed to the mowing conditions (
( 7.3)
– Set the throttle lever to the Start
position ( 10.1)
Fault:
Excessive vibration during operation
Possible cause:
– Cutting unit defective
– Mowing blade imbalance
– Engine mounting loose
Remedy:
– Check mowing blade, blade shaft and
blade fastening screws; tighten blade
fastening screws ( 11.7)
– Re-sharpen/replace mowing blade
( 11.8)
– Tighten engine mounting bolts
Fault:
Petrol runs out of the tank cap when the
machine is placed in the cleaning position
Possible cause:
– Tank ventilation screw was tightening
too firmly
Remedy:
– Replace tank cap
0478 111 9925 E - EN
All manuals and user guides at all-guides.com

19. Service schedule

11.6)
9.),

19.1 Handover confirmation

19.2 Service confirmation

Please hand this instruction manual
to your VIKING specialist dealer in
the case of maintenance work.
He will confirm the service operations
performed in the pre-printed boxes.
Service performed on
Next service date
31
55