Denon ADV-M71 Mode D'emploi page 93

(6) Setting the sleep timer (remote control unit only)
• The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)
• Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).
Example: To set the power to the standby mode in 50 minutesaccording to the clock. Be sure to correct the current time setting.
Set the remote
control selector
switches to A/V
and IN/SURR..
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
1 Select and play the desired function.
2 Press the SLEEP button.
• "120" is displayed and the "SLEEP" indicator flashes.
120
The display switches as follows each time the SLEEP
button is pressed:
120 90 60 50
"SLEEP" indicator off
3 When the "SLEEP" indicator is flashing, press the SLEEP
button again until "50" is displayed.
• "50" is displayed and the "SLEEP" indicator flashes.
50
• After 4 seconds, the display returns to as it was before the
sleep timer was set, and the "SLEEP" indicator stops
flashing, remaining lit. (This completes the sleep timer
setting.)
4 The power is set to the standby mode 50 minutes later.
To turn the sleep timer off, press the SLEEP button repeatedly until
the "SLEEP" indicator turns off. The sleep timer can also be
turned off by press the power button on the main unit or the
remote control unit to turn the entire system's power to the
standby mode.
ON / STANDBY
SLEEP
SOURCE
Remote control unit Main unit
OFF ON
VCR
REC
2,3 SLEEP NTSC/PAL TITLE TIME
SOURCE TV IN T V
ENTER CHARAC. EDIT/MENU
CLEAR A-B REPEAT SLIDE MODE ZOOM
+
-
TV CH TV CH
RDS PTY CT CD SRS RT
PROG/DIRECT REPEAT RANDOM SEARCH MODE
MODE MEMO BAND
TUNING /
DVD TUNER D.AUX TV VOL
+
1 2 3
MD/LINE-1 TAPE /LINE-2
-
4 5 6
5CH STEREO AUTO DECODE TUNER
+
7 8 9
CH
DIRECT STEREO VIRTUAL
-
0 + 10
CALL
/10
TEST TONE INPUT MODE SURROUND FUNCTION
SLEEP
SOURCE
SLEEP
Remote control unit
40 30 20 10
SLEEP
SOURCE
SLEEP
Remote control unit
OFF
Remote control unit
NOTES:
• If the SLEEP button is pressed while the sleep timer is
operating, the setting returns to 120 minutes. Make the setting
over.
• If the sleep timer and everyday timer settings overlap, the sleep
timer has priority.
20:00
Everyday timer
once timer setting
ON
+
Sleep timer
setting
ON
If the timers overlap like this, the timer operates as follows:
20:00
Timer operation
ON
• Also, the everyday timer will not operate if its start time is set
within the time during which the sleep timer is operating.
20:00
Everyday timer
once timer setting
+
Sleep timer
setting
ON
• The remaining time of the sleep timer can be checked with the
STATUS button.
ENGLISH
21:00 22:00
OFF
OFF
21:00 22:00
OFF
Does not operate
21:00 22:00
Does not operate
ON OFF
OFF
93