Denon ADV-M71 Mode D'emploi page 90

ENGLISH
Example 2: Listening to a CD with the once timer
B
DVD SURROUND RECEIVER ADV-M71
ON / STANDBY
1
1 Turn on the power.
2 Open the disc holder, load the CD,
then close the disc holder.
3 Press the MENU/SET button to
display "TIMER".
T I M E R
2 Timer playback and recording can be performed when system connections are made between the ADV-M71 and the D-M31 series MD recorder
(DMD-M31) or cassette deck (DRR-M31). (Both the everyday and once timer can be used.)
• Timer playback of the cassette deck (when TAPE is set for LINE-2)
• Timer playback of the MD recorder (when MD is set for LINE-1 or LINE-2)
• Timer playback of the device connected to the AUX input terminals (when AUX is set for LINE-1 or LINE-2)
• Timer recording of radio programs from the ADV-M71 onto the cassette deck (when TAPE is set for LINE-1)
• Timer recording of radio programs from the ADV-M71 onto the MD recorder (when MD is set for LINE-1)
• Timer recording from the device connected to the AUX input terminals onto the cassette deck (when AUX is set for LINE-1 and TAPE is set
for LINE-2)
• Timer recording from the device connected to the AUX input terminals onto the MD recorder (when AUX and MD are set for LINE-1 and
LINE-2)
Timer recording onto the device connected to the AUX input terminals is not possible. The timer function changes automatically according
to the function set for LINE-1 and LINE-2.
NOTE:
• For timer recording and playback using the device connected to the AUX input terminals, note that the ADV-M71 cannot control the power
of the device or playback operations on it. Make the settings accordingly.
90
4,6
2 2
SURROUND / SELECT
PUSH - PARAM.
- +
BAND
MENU / SET
TONE / SDB
VOLUME
FUNCTION
PHONES
3,4,5,7
ON / STANDBY
Main unit
Main unit
MENU / SET
Main unit
4 Turn the SURROUND/SELECT knob to display "ONCE", then
press the MENU/SET button.
O N C E
The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
ONCE EVERYDAY
5 Press the MENU/SET button.
• The once timer time setting mode is set.
• "1" (once) lights.
1 F U N C
6 Turn the SURROUND/SELECT knob and set the function to
"DVD".
1 D V D
7 Press the MENU/SET button.
• Timer function, "DVD", is stored in
the memory.
8 Now follow steps 9 to 18 under "Setting the everyday timer
and once timer" (pages 88 and 89).
• "1" and "on" light when setting the start time.
"1" and "off" light when setting the stop time.
• Turn the once timer on at step 17.
SURROUND / SELECT
PUSH - PARAM.
Main unit
MENU / SET
Main unit
MENU / SET
Main unit
SURROUND / SELECT
PUSH - PARAM.
Main unit
MENU / SET
Main unit